產品名稱HTL1100
產品介紹
| 國際標準型號 | INTERNATIONAL CLASS | NO | HTW1100 | |||
| L款規格 | SPCIFICATION | CN | HTL1100 | |||
| A | B | C | D | |||
| 注射裝置 | INJECTION UNIT | |||||
| 螺桿直徑 | Screw diameter | mm | 100 | 110 | 120 | 125 |
| 螺桿長徑比 | Screw L/D ratio | L/D | 25.2 | 23 | 21 | 20 |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 4163 | 5037 | 5994 | 6504 |
| 注射重量 | Injection weight(ps) | g | 3788 | 4583 | 5455 | 5919 |
| 注射速率 | Injection rate | g/s | 610 | 739 | 880 | 954 |
| 注射壓力 | Injection pressure | Mpa | 201 | 166 | 140 | 129 |
| 螺桿轉速 | Screw speed | rpm | 100 | |||
| 鎖模裝置 | CLAMPING UNIT | |||||
| 鎖模力 | Clamping force | KN | 11000 | |||
| 移模行程 | Open stroke | mm | 1100 | |||
| 拉桿間距(寬×高) | Space between tie bars(W×H) | mm | 1160×1100 | |||
| 最大模厚 | Max.Mold height | mm | 1200 | |||
| 最小模厚 | Min.Mold height | mm | 450 | |||
| 頂出行程 | Ejector stroke | mm | 325 | |||
| 頂出力 | Ejector stroke | KN | 245 | |||
| 其他 | OTHERS | |||||
| 最大油泵壓力 | Max.Pump pressure | Mpa | 16 | |||
| 最大馬達功率 | Pump motor power | KW | 45+45 | |||
| 電熱功率 | Heating power | KW | 68.4 | |||
| 外形尺寸(長×寬×高) | Machine dimension(L×W×H) | m | 12.30×2.60×3.00 | |||
| 油箱容積 | Olitank cubage | L | 1750 | |||
| 機器重量 | Machine weight | t | 58 | |||
